主營產品：
本公司銷售keysight i1000d, i3070,spea4020,spea4060,spea3030,digital test mts-30,mts-180 mts-300,mts-888,seica flying test systems 德律tr518fe,tr518fR,tr518fv,tr518SII,tr8100,TRI5001T,TR5001SIIQDI tr8100LV 在線測試儀，星河src6001,src8001,星河src3001a,src3001,,foucs-2000,foucs-3000,foucs-4000,hioki,jet3000 泰瑞達18,
文章詳情
LED 測試卡
- 產品名稱：LED 測試卡
- 產品型號：N1124A-003
- 產品廠商：keysiht
- 產品文檔：
你添加了1件商品 查看購物車
簡單介紹
主要特性與技術指標
測試 400-660nm 范圍內的 LED 色彩效果和 μW/cm2 的光強度（亮度）
專用體系結構可發送數字激勵，測試 LED 的色彩效果和光度，并在不到 1.3秒內反饋多達 64 個 LED 的測試結果
一個 N1124A-003 LED 測試卡能夠進行多達 64 個 LED 測試。三個 N1124A-003 LED 測試卡可在 i3070 系統（需要軟件 Rel 8.3 及更高版本）上接通到一個 N1807A-001是德實用程序卡中
利用 i3070 已獲**的無功率數字測試法同時啟動多個 LED
獲取 LED 色彩的峰值、基部或瞬間波長并返回納米（nm）范圍的測量結果
利用套管屏蔽來自周圍 LED 的噪聲（環境光），從而獲得**的可重復性
LED 測試卡
的詳細介紹
N1124A-003 i3070 LED 測試卡
主要特性與技術指標
-
測試 400-660nm 范圍內的 LED 色彩效果和 μW/cm2 的光強度（亮度）
-
專用體系結構可發送數字激勵，測試 LED 的色彩效果和光度，并在不到 1.3秒內反饋多達 64 個 LED 的測試結果
-
一個 N1124A-003 LED 測試卡能夠進行多達 64 個 LED 測試。三個 N1124A-003 LED 測試卡可在 i3070 系統（需要軟件 Rel 8.3 及更高版本）上接通到一個 N1807A-001是德實用程序卡中
-
利用 i3070 已獲**的無功率數字測試法同時啟動多個 LED
-
獲取 LED 色彩的峰值、基部或瞬間波長并返回納米（nm）范圍的測量結果
-
利用套管屏蔽來自周圍 LED 的噪聲（環境光），從而獲得**的可重復性
描述
-
Medalist i3070 LED Test The Keysight Technologies, Inc. Medalist i3070 light emitting diode (LED) test delivers uncompromising repeatability and accuracy in LED color and luminosity measurements with superior throughput during i3070 in-circuit test. It returns the LED color value and luminosity in nanometers and μW/cm2 to accuracies of ± 3 nm and ± 10% respectively. It can test up to 128 LEDs in less than 1.3 seconds, increasing your i3070 test capacity, which translates to lower cost of in-circuit test.
The i3070 LED test consists of: i3070 LED sensor i3070 LED signal conditioner (mux) i3070 LED test card i3070 LED test box i3070 LED starter kit i3070 LED software tools (i3070 release 8.3 and greater) i3070 runtime integration (i3070 release 8.3 and greater)
The i3070 LED test sensors and LED signal conditioner (mux) card are installed in the i3070 test fixture similar to our VTEP solutions. Thirty-two i3070 LED test sensors can be wired to each i3070 LED signal conditioner (mux) card, and four i3070 LED signal conditioner (mux) cards to one i3070 LED test card in a Utility Card or an i3070 LED test box. The i3070 LED signal conditioner (mux) card in the fixture is then connected to the i3070 testhead electronics via the i3070 LED test card plugged into a utility card or a i3070 LED test box. The i3070 LED test box saves a hybrid card slot and is mounted within the i3070 test head.
-
i3070 LED Test Specifications
Measurement Range Units Accuracy
Color (Hue) 400 to 660 nm ± 3 nm Luminosity 0 to 18,000 μW/cm2 ± 10%
i3070 system requirements
Software Release 8.3
Hardware
? Utility Card with i3070 LED test card OR ? i3070 LED test box
- 測試 400-660nm 范圍內的 LED 色彩效果和 μW/cm2 的光強度（亮度）
- 專用體系結構可發送數字激勵，測試 LED 的色彩效果和光度，并在不到 1.3秒內反饋多達 64 個 LED 的測試結果
- 一個 N1124A-003 LED 測試卡能夠進行多達 64 個 LED 測試。三個 N1124A-003 LED 測試卡可在 i3070 系統（需要軟件 Rel 8.3 及更高版本）上接通到一個 N1807A-001是德實用程序卡中
- 利用 i3070 已獲**的無功率數字測試法同時啟動多個 LED
- 獲取 LED 色彩的峰值、基部或瞬間波長并返回納米（nm）范圍的測量結果
- 利用套管屏蔽來自周圍 LED 的噪聲（環境光），從而獲得**的可重復性
The i3070 LED test consists of: i3070 LED sensor i3070 LED signal conditioner (mux) i3070 LED test card i3070 LED test box i3070 LED starter kit i3070 LED software tools (i3070 release 8.3 and greater) i3070 runtime integration (i3070 release 8.3 and greater)
The i3070 LED test sensors and LED signal conditioner (mux) card are installed in the i3070 test fixture similar to our VTEP solutions. Thirty-two i3070 LED test sensors can be wired to each i3070 LED signal conditioner (mux) card, and four i3070 LED signal conditioner (mux) cards to one i3070 LED test card in a Utility Card or an i3070 LED test box. The i3070 LED signal conditioner (mux) card in the fixture is then connected to the i3070 testhead electronics via the i3070 LED test card plugged into a utility card or a i3070 LED test box. The i3070 LED test box saves a hybrid card slot and is mounted within the i3070 test head.
i3070 LED Test Specifications
Measurement Range Units Accuracy
Color (Hue) 400 to 660 nm ± 3 nm Luminosity 0 to 18,000 μW/cm2 ± 10%
i3070 system requirements
Software Release 8.3
Hardware
? Utility Card with i3070 LED test card OR ? i3070 LED test box
Measurement Range Units Accuracy
Color (Hue) 400 to 660 nm ± 3 nm Luminosity 0 to 18,000 μW/cm2 ± 10%
i3070 system requirements
Software Release 8.3
Hardware
? Utility Card with i3070 LED test card OR ? i3070 LED test box